Indiana Jones Holster: Built Long for the Big Service Revolvers
Every time someone turns up to an event in a fedora and a leather jacket, the Indiana Jones holster question follows within about ten minutes. Not "is it accurate" (that one comes later, usually from me) but "will my gun actually go in it?" And with the big old service revolvers people tend to carry for this kind of impression, that's a fair worry.
The Indiana Jones Style Revolver Holster is a leather flap holster made deliberately longer than the film pattern, so it takes large-frame revolvers with barrels up to 6 inches. That one decision is the whole point of it, and it's why I think it's the more useful choice for most people, even if the screen-accuracy crowd will grumble. First, though, the guns.
What Indy Actually Carried in Raiders
In Raiders of the Lost Ark, Indy's main sidearm is a large-frame Smith & Wesson of the Hand Ejector, Second Model type. The production used two similar props, both with barrels cut down to about four inches. One was a .45 Smith & Wesson M1917 from Stembridge Gun Rentals in California. The other was a blank-firing British-issue Mk II Hand Ejector chambered in .455 Webley, and that's the one doing most of the work in Cairo. Accounts differ on exactly which prop house supplied the .455 gun, so I won't pretend to settle it here.
The holster in the film was a flap holster made for the production and sized for that 4 inch Smith & Wesson. Which is lovely if you happen to own a 4 inch N-frame. Most of us don't.
So here's the thing. The real wartime guns weren't four inch guns. The Colt New Service in British .455 service, for example, was listed with a 5.5 inch barrel, and the M1917s that turn up at events today are mostly full length too. Squeeze one of those into a screen-accurate 4 inch holster and you've got a muzzle poking out the bottom. The Indiana Jones style holster gets round that by being cut longer, because 4 inch barrel revolvers are hard to come by. It's built to hold a range of Colt, Smith & Wesson and Webley revolvers rather than one film prop.
The Wartime Revolvers Behind the Indiana Jones Holster
This is the part I enjoy, because the guns Indy carried have proper First World War backgrounds of their own.
The Smith & Wesson Hand Ejector Second Model went into production in January 1915. That run lasted until 14 September 1916 and produced 74,755 revolvers chambered in .455 Mark II for the British. That's where the Mk II Hand Ejector in Raiders comes from, a British-issue gun from the first half of the war.
Then America came in. The US Army needed revolvers to back up the M1911 pistol, and wanted them in the same .45 ACP round, so both Colt and Smith & Wesson were asked to build them. The first Hand Ejector Second Models for the US government came off the line on 6 September 1917, and they became the US Army Model 1917.
The rimless .45 ACP case was the snag in a revolver. The fix was the half-moon clip, patented by Smith & Wesson, and the Army talked the company into letting Colt and others use it because of the wartime emergency. Colt's own M1917 was based on its earlier M1909 New Service.
And the New Service itself has a longer story. Colt made it from 1898 until 1941. British Empire examples were stamped "NEW SERVICE .455 ELEY" on the barrel, and plenty of British officers bought their own privately. (Which is a nice detail if you're building a kit for a character who served in that war and kept his sidearm afterwards, though I'll leave the backstory writing to you.)
Is it a screen copy?
No, and I'd rather say that plainly. It's sold as an Indiana Jones style holster, and the extra length alone means it isn't a match for the 4 inch film piece. One customer put it bluntly, saying it's well built but doesn't much resemble the movie prop. Another said it looks like a new, unissued WWI Webley holster. Honestly I think both of them are right, and I'd take the second as a compliment.
If you're the sort of person who measures stitch counts off screen grabs, this isn't your holster. If you want something that holds a real-sized revolver and looks at home with 1930s field kit, it is.
Fitting and Breaking It In
It arrives stiff. Most owners say so, and that's true of any decent new holster leather. Here's what owners report doing:
- A light coat of neatsfoot oil or mink oil, then leaving the revolver in it for a day or two so the leather shapes itself round the gun.
- Saddle soap or conditioner if the leather shows a little mildew on arrival, which a couple of buyers mentioned.
- Punching an extra hole in the flap strap for a Colt 1917, since the big revolver can stop the strap reaching the existing hole.
- Expecting some fettling on certain guns. One owner modified it slightly for a K-frame .38, and another said his Smith & Wesson wouldn't go in without changes.
Fit with Webleys seems mixed, to be fair. One owner says it fits like a glove, another couldn't close the strap at all. I'd guess that comes down to the exact model and how far the leather has been worked, but if you've got a Webley I'd plan on a bit of breaking in before you judge it.
How People Use It at Events
Mostly for 1930s adventurer impressions, obviously, worn on a belt with the flap closed over a replica or a deactivated piece. One customer uses it to carry archaeology trowels, which made me laugh but is actually rather sensible.
What I wouldn't do is pass it off as a specific military pattern at a strict WWI event. It's a style holster. It'll look right in a general period setting, but a sharp-eyed inspector will ask what pattern it's meant to be, and "the film one, but longer" isn't an answer that wins arguments.
Anyway. If you've got a full-size Colt, Smith or Webley and you've been putting off an Indy kit because nothing fits, the Indiana Jones Style Revolver Holster solves that problem neatly.
What Our Customers Say About It
"Well made, and fits my old Smith and Wesson perfectly."
"It fits my other New Service Colt and N-Frame Smiths as well. Very versatile with full protection for these rugged old warhorses."
"Good quality leather but very stiff at first. I added a little neatsfoot oil and left my revolver in the holster."
You can read every review, the critical ones included, on the customer reviews page.
Disclaimer: Historical information provided for educational purposes only. For accurate product specifications and details, please check our product pages, reviews, or contact customer service.
Experience a piece of history for yourself! Check out our authentic reproduction of Indiana Jones style Holster here: Get Your Indiana Jones style Holster












