The HS-18 Headset: R-14 Receivers for the M1938 Tanker Helmet
The first time I put on my M1938 tanker helmet for a public event, a lad of about ten looked at the empty leather ear flaps and asked where the radio went. Fair question. Without an HS-18 headset fitted, the helmet is basically a padded football lid, and anyone who knows armour notices straight away that something's missing.
So this post is about the bit that goes in those ear flaps: the US HS-18 Headset for Tanker & Flight Helmets, a pair of reproduction R-14 receivers on a wiring loom ending in a PL-54 plug. It doesn't work (more on that later, and honestly I don't mind), but it finishes the helmet in a way nothing else does.
What the HS-18 Headset Actually Was
The name confuses people. The HS-18 isn't a headset in the sense of something you clamp over your ears. It had no headband. It was a pair of receivers and a cord, built to sit inside a helmet. Put the same R-14 receivers on an HB-7 headband and you had a different designation, the HS-23, for use where nobody was wearing a helmet.
The parts, as collectors describe originals:
- Two R-14 receivers, the earphones that sit in the ear pieces
- A brown braided, cloth covered comm cord
- A black PL-54 jack plug on the end
In a tank, that PL-54 went into a JK-26 jack on a 6 foot CD-307 extension cord, and the HS-18 cord had a strain relief built in so the wiring didn't get yanked apart when a crewman moved around inside the turret.
Who Used It: Tank Crews and the Army Air Forces
The M1938 helmet itself came out of a 1938 Ordnance Board effort to settle on one standard tank helmet. They tested existing service and commercial types, settled on the cavalry pattern as the starting point, and got Rawlings to develop it. Wilson, Spalding and Sears Saddlery made them too, so if you're hunting originals you'll see all four maker marks. The leather ear flap assembly was the distinctive new feature, and it's exactly where the R-14 receivers sit.
The HS-18 was the original and most common headset for that helmet. The armoured force did eventually take up the later low impedance HS-38 as well, but the majority of tank helmet headsets for most of the war seem to have been the original high impedance HS-18.
On the air side, the Army Air Forces used the same set in the A-8, A-9, B-5 and B-6 flying helmets. One flight gear reference site calls it the early WW2 standard headset for helmets, and shows a set still in its factory box from 1942. Handy, frankly, since one set covers two quite different impressions.
The Switch to Low Impedance (and the Red Plug)
Around 1943 the Army Air Forces and the Navy started moving to the ANB-H-1 receiver, which was 600 ohms against the much higher impedance of the R-14. The helmet version of that new set was the HS-38, the headband version the HS-33. For a while the old and new were in service side by side, and to stop anyone plugging the wrong headset into the wrong radio, the new ones got a red PL-354 plug while the HS-18 kept its black PL-54.
That colour difference is the quickest way to tell them apart in a period photo or at a militaria fair, since the ANB-H-1 receiver looks much like the R-14.
A small caveat on numbers. Sources don't agree on the R-14's impedance. Some put it at 2000 ohms, while one well known flight gear site argues for something nearer 4000 ohms and admits the disagreement openly. What matters for us is that the R-14 was high impedance and the later sets weren't.
And this is where the flight helmet side gets tricky. The HS-38 went into later helmets like the A-10A, A-11, AN-H-15 and AN-H-16. So if you're doing a late war bomber crew impression in an A-11, the HS-18 with its black plug is arguably the wrong headset. For the earlier A-8, A-9, B-5 and B-6 it's right. One of our own reviewers mentioned in Spanish that it took some work to adapt to an A-11.
The Reproduction HS-18 Headset Up Close
The US HS-18 Headset for Tanker & Flight Helmets is a reproduction of the R-14 receivers and wiring loom with the PL-54 plug. The receivers are not functional. That's stated plainly, and I'd rather it was.
Is that a problem? Not for me. My helmet's job is to look right in a camp display and on a crew in front of a vehicle, not to talk to anybody. One customer put it nicely, asking what you'd even be listening to with an original set anyway. (Someone else in the reviews has wired an earbud into theirs, with drills and taps and a mono jack. I admire the commitment. I'm not doing it.)
Reviewers who own originals have pointed out the differences, which I'd rather know about than not:
- The cloth cord is new, so it lacks the wear of an 80 year old set
- The wires inside the fabric covering are rubber coated, where originals are fabric sheathed, visible only where the wires meet the receivers
- One buyer found the cord between the receivers about 5 inches longer than on his original tanker helmet
A bit of extra cord tucked behind the padding is easy to hide, though.
Fitting and Using It at Events
Fitting is simple. The receivers sit into the ear flaps of the M1938 helmet, the cord runs down, and the PL-54 hangs free or goes into whatever period jack you've got. If you've got a T-30 throat mic and some goggles on the helmet as well, you've got the full crew look.
Anyway, a practical tip. Don't leave the plug swinging when you climb on and off a vehicle, it catches on everything. Tuck it into your jacket or clip it out of the way.
For a static display, an empty tanker helmet looks unfinished to anyone who's seen the real thing. With the HS-18 headset in place it reads properly as a radio-equipped crew helmet.
What Our Customers Say About It
One customer wrote that it "Even has orange stamping. Cord and plug look convincing." Another, comparing against his originals, said "you gotta look close and hard to see those exposed wires where they attach to the receivers." A New Zealand customer fitted them to Stuart tank crew helmets and said they finish the helmets off nicely, though he called it "a real pity they aren't a working unit." And one honest note: a reviewer found "the cloth cord is off color a bit." You can read them all on the customer reviews page.
If your M1938 helmet has been sitting there with empty ear flaps, this is the piece that sorts it.
Disclaimer: Historical information provided for educational purposes only. For accurate product specifications and details, please check our product pages, reviews, or contact customer service.
Experience a piece of history for yourself! Check out our authentic reproduction of US HS-18 Headset for M38 Tanker Helmet or early Flight Helmets here: Get Your US HS-18 Headset for M38 Tanker Helmet or early Flight Helmets












