Shopping Cart Items: 0   Sub-Total : US$0.00

The Thompson SMG Sling: Kerr Pattern Khaki Web for the Tommy Gun

The Thompson SMG Sling: Kerr Pattern Khaki Web for the Tommy Gun
1 September 2026

I've spent more time at events fiddling with a Thompson SMG sling than with any other single strap I own, and I still wouldn't swap it for anything simpler. It's an odd bit of webbing. Two pieces, a pair of hooks, a buckle, and about six different ways to put it on, all of which somebody on a forum will tell you are wrong.

This post is about our Thompson SMG sling in yellowish khaki web, but mostly it's about the original: where it came from, why collectors still argue over what to call it, and why the colour matters more than you'd think for a 1942 or 1943 impression.

What the Thompson SMG Sling Actually Is

The sling most people picture on a wartime Tommy gun is the Kerr pattern, a design from the Kerr Adjustable Strap Co. Original hooks carry the "NOBUCKL" name and some are stamped with a 1914 patent date. You'll also see it called the M1914 sling now and then. It's 1 1/4 inches wide and made of two separate lengths of web, a short piece of 14 1/2 inches and an adjustable piece of 43 inches. Think of it as a shortened version of the Kerr extension sling that was sold for the 1903 Springfield.

Because of the hooks and the two-piece layout it can be rigged long, short, tight against the gun or loose for carrying over the shoulder. That flexibility is the whole point. It's also the reason half the photos you'll find online show it set up differently.

Kerr Pattern or M1923, the Collector Argument

Here's where it gets a bit messy. Not every collector agrees that the Kerr was the Thompson sling. On one well-known military surplus forum a contributor argues that the web M1923 sling, designed in the 1920s as a cheaper alternative to the leather M1907 but not made in quantity until the war, was the standard sling for the Thompson. Another member in the same thread replies with the obvious question, wasn't that the Kerr?

Most reference pages and the collectors I trust treat the Kerr pattern as the correct wartime Thompson sling, and that's the one this reproduction follows. But I'd rather tell you the argument exists than pretend it's settled. If you see an M1923 on a Thompson in a period photo, don't assume somebody got it wrong.

The Gun It Hung From

The Thompson itself was in a bad way commercially before the war. Auto-Ordnance was bought by Russell Maguire, and production went to the Savage Arms Corporation, so from 1939 there were guns to meet orders from the British and, later, the Americans. More than 1.5 million Thompsons were made during the Second World War, in the M1928A1, M1 and M1A1 versions, and the Kerr sling fits all three.

One detail British impression people should know: most Thompsons in British service had the rear sling swivel moved to the top of the butt, so the gun could be held ready while slung over the shoulder. So the sling hangs differently on a British-modified gun than on a US one. Small thing. Somebody will notice.

The Kerr sling wasn't only a Thompson item, either. It turns up on trench guns and several other weapons too. And the Thompson's own days were numbered once the M3 "grease gun" was adopted on 12 December 1942, though the M3 didn't start reaching frontline units in numbers until around mid-1944.

Khaki First, Olive Drab Later

This is the bit people get wrong most often, in my experience. US web gear was supposed to change from OD shade no. 3 (the light olive tan collectors just call khaki) to the darker green OD shade no. 7 in 1943. In practice manufacturers used up whatever web they had on hand, so you get khaki items with late dates and the odd green one earlier than you'd expect.

For the Thompson sling, the pattern seems to be khaki for most of the war, with olive drab slings issued once the khaki stocks ran out. One documented late example in OD is marked R.I. ORD Center 1945. Plenty of slings also went through mildew-resistant treatment after the war and came out stamped "MRT" with a 1950s or 1960s date, which is worth knowing before you pay original money for one at a fair.

So for most wartime impressions khaki is the safe bet, and a very late war impression can justify green. (I've seen people agonise over this for a full weekend. Pick your date first, then the colour follows.)

About Our Reproduction

Our Thompson SMG sling is made in the yellowish khaki web used during most of WWII, which is the colour I'd want for nearly every impression I can think of. The product photo shows an original sling lying over one of the reproductions, so you can judge the shade and the hardware for yourself rather than taking my word for it.

It is a reproduction, and it's sold as one. A couple of honest points from people who've bought it: the hardware has no original maker stamp, a few buyers found the spring on the clips a bit soft, and some have had surface rust on the buckles out of the packet. None of that bothers me much on a working sling, but if you're a stickler, check the clips before your first event and give the metal a once-over.

Using It at Events

Most reenactors carry the Thompson slung over the shoulder on the march and bring it up when the scenario starts, and the Kerr pattern is good at that. The weight is what you notice. A loaded Thompson isn't light, and a badly adjusted sling will let it bang about on your hip all afternoon.

  • Set it up at home, not in a field at 7am with cold hands.
  • Work out which configuration you want and stick with it. Find a wartime photo of your unit if you can.
  • For a British impression, remember where that rear swivel sits.
  • Fine steel wool sorts out light surface rust on the hardware.

It works on airsoft and replica Thompsons too, judging by the customers who've put the US Thompson sling on both. Anyway, get the colour right and the setup right and it disappears into the impression, which is exactly what good kit should do.

What Our Customers Say About It

One buyer with an original wrote that it is "virtually identical to my real one apart from no original maker stamp on hardware". Another called it a "Great repro that matches up well with the originals." Someone else noted "Some surface rust on the hardware, easily removed with fine steel wool." And one honest reviewer summed up the fitting problem: "there are so many different ways i have seen this thing go on, its hard to tell which is right." You can read all of them on our customer reviews page.

Disclaimer: Historical information provided for educational purposes only. For accurate product specifications and details, please check our product pages, reviews, or contact customer service.

Experience a piece of history for yourself! Check out our authentic reproduction of US Thompson SMG slings here: Get Your US Thompson SMG slings

Comments

Leave a comment
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

A B C D E F G H I J K L M N O P Q R S T U V W X Y Z
0 Item(s)
US$0.00