The US GI Pup Tent Peg: Five Pins a Man, Ten a Tent
Nobody gets excited about a pup tent peg. It's a short length of shaped wood, and it's the piece of kit most likely to get left behind in a wet field on a Sunday afternoon while everyone's packing up. But try pitching a shelter tent without them and you find out very quickly how much the whole arrangement depends on these little things.
So this post is about the US GI Pup Tent Peg, our new reproduction of the standard wooden stake used with the American shelter half. One peg per price, by the way, which matters when you work out how many you actually need (more on that below, because the numbers are where a lot of people go wrong).
What the Reproduction Pup Tent Peg Is
It's a new-made copy of the standard wooden tent peg for the GI pup tent. That's it. It's sold as a new reproduction, not as something that's been sitting in a barn since 1944. You buy them singly, so you can make up a full set or just replace the ones that went missing at the last event.
I like that they're plain. A new one looks new, and honestly that's correct for a soldier who's just been issued his kit. If you want yours to look used, use it.
Where the Wooden Tent Pin Came From
The wooden pin is older than most people assume. According to collectors on the U.S. Militaria Forum, the first Quartermaster specification for the wooden tent pin was issued on 5 January 1889, so the basic idea was settled long before either world war.
Here's the part I find interesting. The Infantry Equipment Board that designed the 1910 equipment introduced a small aluminium pin shortly before the First World War. And then, during the war, the Quartermaster went back to wood. Collectors have dug several variations of those early aluminium pins out of sites in France, so they clearly did go overseas, but the wooden pin is the one that carried on. Why, I can't say for certain (I haven't seen a document that explains it), so I won't guess in print.
By the Second World War the official name was "Pins, Tent, Shelter, Wood", stock number 74-P-125. Reference sites on US Army WWII tentage describe them as rounded wooden pins nine inches long.
Five Pegs a Man, Ten a Tent
This is the bit people get wrong, so I'll spell it out. The shelter tent was a two-man affair. Each soldier carried one shelter half, his pole sections and five pins, usually as part of his field pack, and two men buttoned their halves together to make one tent.
The War Department field manual on tents and tent pitching, FM 20-15, lists the complete shelter tent (old type) as needing:
- 10 wooden shelter tent pins, stock no. 74-P-125
- 8 foot stop lines
- 2 guy lines
- 2 tent poles
So if you're setting up a full pup tent on your own, buy ten. If you and your mate each bring your own half, five each. I've seen people turn up with three pegs and a hopeful expression, and the tent looked like it.
The pole arrangement changed between versions of the shelter half (some listings show three single-section poles per man, others one pole), but the five pins per man show up in each of the listings I found. The pins themselves just weren't the part anyone redesigned much.
Pitching It the Army Way
The drill for pitching shelter tents is very precise. Men paired off as odd and even numbers, and the odd-numbered man placed a pin in the ground on the spot he'd marked with his left heel. The halves went down buttons to the centre, triangle to the rear, with the even-numbered man's half on the left.
Then the odd-numbered man pinned down the rear and drove the rear guy pin two and a half tent-pin lengths from the rear pin of the triangle. I love that detail. The pin was its own ruler. The even-numbered man drove the remaining pins on the left, the odd-numbered man the ones on the right. Striking was the reverse: unbutton enough to get at the poles, let the tent fall, pull the pins, roll the packs.
We've done the formal version for the public a couple of times. It's the only time I've seen a whole squad actually count its pegs before leaving.
Later Metal Pins
Metal came back eventually. A 9 inch aluminium pin turns up in later kit lists under FSN 8340-261-9749, and one collector has posted an example with a 1967 date. So if you're doing WWII, don't let anyone talk you into the later metal pins because they're "basically the same". They aren't, and the people who notice that sort of thing will notice.
Using the US GI Pup Tent Peg Today
Most of mine get used at living history weekends, driven into ground that's either rock hard or soup. A few practical things I've learned:
- Use a wooden or rubber mallet, not a steel hammer. Wood splits.
- Carry a spare or two. Somebody always loses one.
- Check for knots before you drive one into stony ground.
Anyway, they also work fine just sitting in a display. A shelter half laid out next to a pack with the pins and poles alongside tells the story of how a GI slept far better than a placard does. If you're putting together that kind of display, the reproduction pup tent peg is the cheap end of the job, which is a nice change.
What Our Customers Say About It
We've had a lot of reviews on these. One reenactor wrote that they "held up well at this past tactical event." Another buyer, who clearly knows the originals, said they "look just like my originals and with a few hits of the old M1910 shovel they should REALLY look original". (That's the spirit.) One gave practical advice I'd second: "As with any wooden stake, don't use a metal driver, either a wooden or nylon mallet."
Not every review is perfect, and I'd rather show that too. One customer who ordered five found that "One came with a LARGE knot in the wood which didn't quite come out right", and judged it OK for display but not for the ground. Wood is wood. A couple of Civil War reenactors bought them too, reckoning the eras' pegs barely differ, though that's their view, not something I've checked. You can read every review on the US GI Pup Tent Peg reviews page.
Small item, cheap to get right. Ten of them, a pair of shelter halves and the poles, and you've got a proper GI pup tent. Pick up your US GI Pup Tent Peg set before your next event, and buy a spare.
Disclaimer: Historical information provided for educational purposes only. For accurate product specifications and details, please check our product pages, reviews, or contact customer service.
Experience a piece of history for yourself! Check out our authentic reproduction of US Tent Peg here: Get Your US Tent Peg












