The M1938 Tanker Helmet: A Reenactor's Look at the Reproduction
I put off buying an M1938 tanker helmet for years. Partly because a good original costs what a good original costs, and partly because every reproduction I tried sat on top of my head like a cereal bowl. So when the Improved US M1938 Tanker Helmet came along with an adjustable suspension and a stated fit of 7 1/4 to 7 3/4, I was curious enough to try it, and I've been wearing it at armored impressions since.
It's the one item that tells people you're a tank crewman before they've seen anything else. Coveralls and a mackinaw could belong to half the motor pool. That padded, ribbed dome with the leather ear flaps can't.
What the Improved M1938 Tanker Helmet Is Made Of
The shell and the neck piece are compressed fiber, like the originals, and everything else on it is leather. That matters more than it sounds. Fiber has a particular dull stiffness to it, and it doesn't flex or squeak the way a plastic shell does when you pull it on. The leather flaps and straps take a bit of wear to settle, and mine looked a touch too clean out of the box (more on that below).
The suspension adjusts, just like the originals did, which is the whole reason I bought it. My head sits right at the big end of the range and the helmet sits down properly instead of perching.
One more thing from the shop's own description: these helmets were provided to the film "Fury". I'm not going to make more of that than it is, but it does tell you somebody on a big costume budget was happy with how they looked on camera. And to be clear, this is a reproduction. Nobody should sell it, or buy it, as anything else.
Where the Original Came From
The wartime helmet was a Rawlings design, and if you've ever handled an old leather football helmet you'll see the family resemblance straight away. The 752nd Tank Battalion's reference site describes the Rawlings helmet as resembling a football helmet in both design and construction, which makes sense given who was making it.
Rawlings wasn't the only maker. Manufacturing rights went to four firms:
- Rawlings Manufacturing Corporation
- Wilson Athletic Goods Manufacturing Company
- A.G. Spalding & Brothers
- Sears Saddlery Company
They all worked to essentially the same specification, but there are slight differences in small details between the four, which is exactly the sort of thing collectors argue about over a table at a militaria fair. Originals are usually maker marked inside. A Rawlings example I've seen documented carries the maker name, the size, the Army specification number 76072 and patent numbers, while a Wilson one is stamped WILSON ATH. GOODS MFG. CO. with the size and CHICAGO, ILL.
Dating is where people get loose. The pattern carries the 1938 designation, but the Rawlings patent drawings were filed on 1 May 1941, so I'd be wary of anyone telling you exactly when a given helmet was made just from the model name.
What set it apart from the earlier tank helmets was the leather ear flap assembly. That's the bit that holds the earphones, and it's the bit that makes the helmet useful inside a vehicle rather than just protective.
The earphones
The original and most commonly used headset in the tank helmet was the HS-18. The later low impedance HS-38 was eventually adopted too, and it's easy to spot because its PL-354 plug shell was colored red so nobody plugged it into high impedance equipment by mistake. Even so, most helmets for most of the war seem to have used the HS-18. Original sets turn up with receivers marked Type R-14, made by Kellogg for the Signal Corps.
The rigid earphone retaining tabs on originals are often missing or broken, by the way. If you're buying a real one, check them first.
Wearing an M1938 Tanker Helmet at Events
Mine gets more wear than almost anything else in my kit. It's warm, which is lovely in October and miserable in July, and the leather flaps cut down the noise of an engine more than you'd expect (not that I'm claiming it's hearing protection).
A few things I'd pass on:
- Take the shine off. One reviewer suggested some "judicious scrubbing" and I agree. New leather looks new. A bit of handling, a bit of dust, and it starts to look like it's been in and out of a hatch.
- Check the snaps on the back straps before your first event. This is the real weak spot, and several buyers have had them pop off or break. Some fixed them, some sent the helmet back. I'd rather you knew now than found out in a field.
- It doesn't come with a chin strap, and at least one customer wished it did.
- The steel pot over the top is a look you see in period photos, and one buyer paired theirs with an original M1 and said "The fit is perfect."
And if you add earphones, one customer said the com set "went in easily". Fair enough. Mine are dummies anyway.
What bugs me about the hobby, a little, is the number of guys who build a beautiful Sherman crew impression and then wear a helmet two sizes too small with the flaps sticking out sideways. The fit is half the look. That's why the adjustable suspension on the Improved US M1938 Tanker Helmet is the feature I'd point to first, ahead of anything else on it.
What Our Customers Say About It
The reviews are mostly warm, and honest about the snaps. One buyer wrote that it's "nearly identical in every detail to a WWII issue M1938 tanker helmet". Another, who owns a real one, said "The differences between this one and my original are almost undetectable." A collector put it this way: "AFAIK this is the most correct repro available on the market at the moment, reproducing a rawlings type well enough."
On fit, one buyer with a 7-3/4 head said it "adjusted to perfect fit" and another said "Any all the other offerings on the market are too small for me."
And on the downside, in their words: "One of the most common complaints is the snaps on the straps at the back." You can read the lot, good and bad, on the customer reviews page.
So that's my take. If you've got a big head and an armored impression that's been missing its most recognisable piece, the Improved US M1938 Tanker Helmet is worth a look. Just check those snaps.
Disclaimer: Historical information provided for educational purposes only. For accurate product specifications and details, please check our product pages, reviews, or contact customer service.
Experience a piece of history for yourself! Check out our authentic reproduction of US M1938 Tanker Helmet (New) here: Get Your US M1938 Tanker Helmet (New)












